Integral Frame Rolling Counter Doors – 658
Model 658
The integral frame / packaged counter door Model 658 combines an attractive finished appearance with the convenience of a factory-assembled unit. These non-rated counter doors feature a high-quality 16-gauge primed steel frame, hood and fascia complemented by a 14-gauge stainless steel sill. Available to fit openings up to 12’5″ (3785 mm) wide and 6′ (1956 mm) high, these rolling counter doors have a variety of applications including food service areas.
Overview
| Standard Max Width | 12'5" (3785 mm) |
| Standard Max Height | 6'5" (1956 mm) |
| Curtain | Interlocking 22-gauge primed galvanized steel slats |
| Hood | Stainless steel |
| Integral frames | 16-gauge stainless steel |
| Sill | 14-gauge stainless steel |
| Mounting | Between jambs |
| Operation | Manual push up |
| Warranty | OEM limited |
Options
Door Options
- Crank operation
- Cylinder locking options
- Tubular bottom bar
- Lintel brush seal
- Guide brush seal
Documents
Rolling Counter Doors
Related products
Fire-Rated Rolling Service Door – 631
Model 631
FireKing® Model 631
Fire-rated service door model 631 is a smaller fire door with UL/ULC ratings. The FireKing® Model 631 rolling fire-rated service door offers superior protection wherever a small UL listed fire door is required. Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, FireLite® vision lites, smoke detectors, horns and strobes
Rolling Counter Doors – 652
Model 652
Distinguished by their clear anodized aluminum curtain finish, Model 652 rolling counter doors are designed to fit openings to 20' wide and 9' high. These doors are ideal for a host of small-opening applications where security is important and non-rated door is appropriate. Common applications include concession areas, cafeterias, pharmacies, parts-storage areas and ticket windows.
Rolling Integral Frame Counter Doors – 655
Model 655
The integral frame / packaged counter door Model 655 combines an attractive finished appearance with the convenience of a factory-assembled unit. These rolling counter doors feature a high-quality 16-gauge stainless steel frame, hood and fascia complemented by a 14-gauge sill. Available to fit openings up to 12'5" (3785mm) wide and 6'5” 1956 mm) high, these rolling counter doors have a variety of applications including food service areas.
Rolling Sheet Door – 780CD
Model 780CD
ProStar™ Model 780CD
The Model 780CD rolling sheet door is designed to fit openings up to 16' by 16' (4877 mm by 4877 mm) with ease, versatility, and good looks. The Model 780CD is designed for heavy-usage environments where a high wind load-rated door is not required. Like the Model 790CW, this heavy-duty door is fabricated of high strength, 26-gauge galvanized steel curtain sections for superior performance. It also features our innovative quick-connect components that allow quick and easy assembly without sacrificing stability or durability. Stepped counterbalance rings and a unique curtain profile minimize nesting. The universal guide design further simplifies installation by allowing mounting directly to concrete, masonry, steel or wood jambs. Additional standard features such as dual rub strips on both edges of guide and a flexible webbing on both front edges of the curtain to minimize nesting ensure that the Model 780CD will provide long-lasting, lower-cost performance for years to come.
Rolling Sheet Door – 790CW
Model 790CW
ProStar™ Model 790CW
When your project requires a door that can handle high wind load conditions, yet is attractive, versatile and economical, the Model 790CW rolling sheet door fits the job. This rolling sheet door is rated for a design pressure from 22/-22psf (for a 20’0” wide door) to 41/-41psf (for a 10’0” wide opening), and can be built up to 16’0” tall. This rolling sheet door is available in 12 standard colors. Fabricated of high strength, 26-gauge galvanized steel curtain sections, 14-gauge universal guides, and steel bottom bar angle, the 790CW rolling sheet door is a strong and durable door. With quick-connect components, universal through-hole guide design, and unique curtain profile and stepped counterbalance rings that minimize nesting, this door is designed for fast installation, smooth operation and low maintenance, too.
Rolling Steel Service Door – 600
Model 600
Coil-Away™ Model 600
This rolling steel service door is an ideal choice where economy and functionality are important. The Model 600 door comes standard with bottom weatherseal; wind load, chain hoist or motor operation and hood options are available to expand its uses in a variety of light commercial applications.
Rolling Steel Service Doors – 610
Model 610
Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain. The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow the 610 to be adapted to any environment.
Security and Storm Shelter Model 610F is a specialized option designed for storm shelters, schools and emergency operations centers. Model 610F provides tornado resistance while meeting the high wind load and impact requirements for FEMA 361.
Wood Rolling Counter Doors – 665
Model 665
These wood counter doors offer the richness of natural wood to enhance the beauty of any application. Manufactured of high-quality wood - Red Oak (standard), Douglas Fir, White Oak, Birch or Exotic species -- these counter doors are ideal for use in hotels, banks, churches, libraries, offices, restaurants and schools.
