Mechanical Pit Leveler M68R & M78R
- Fast, safe install with height adjusters operated while standing on building floor-no need for installer to be under leveler and no shimming/welding needed in rear of pit
- Adjusters quickly position the dock level with the building floor
Improved safety — the installer is never under the leveler - Levelers ship with four steel fork loops bolted to the deck, which improves stability when lifting from a truck. The loops help with forklift placement into a pit from inside or outside the building, and helps to minimize levelers sliding while stacked on top of each other
- Cut outs identify weld points to the curb angle for faster installation
- Lifter arm is mounted to the rear of the frame instead of sitting on pit floor. No need to shim or weld under the lifter arm
Durable Design and Finish
- Base frame is open all the way to the rear of the pit for easy access with no cross beams or places to trap debris
- C-channel beams create a strong deck structure and allows moisture to dry
- Deck design eliminates the transition angle which is a frequent repair on many levelers
- Deck hinge is fully supported across the entire width of the deck to enhance long term durability
- Durable textured powder coat finish
- Compliant with ANSI MH30.1-2022
Smooth Building-To-Truck Transition
- Designed with an optimized beveled lip to reduce bumps and damage to cargo and material handling equipment
- Reduces shocks and jolts to workers by creating a level pathway
- Facilitates fast movement of material handling equipment and forklifts
Easy-to-Use and Ergonomic
- Release chain for deck operation is user friendly and easy to pull
- The hold down is easy to operate
- Leveler is well-balanced for quick, easy articulation and automatically maintains positive lip contact with trailer movements
- The snubber chain and maintenance brace are positioned at side edges allowing easy access to the pit for maintenance and cleaning
Features
Installer Friendly
Safety Focus
- Installers are never under the pit
- Minimal bumps or gaps on deck/lip reduce trip hazards for workers
- Proprietary powder coat formulation on deck and lip surfaces is textured to provide enhanced traction and non-slip protection even when wet
Durability, Low Maintenance, Low Downtime
- Heavy duty multi-lug construction of the lip hinge. The design helps shed debris instead of trapping/grinding it between the lip/deck junction that can cause fatigue and maintenance issues. The lug construction also allows for easy lubrication of the hinge.
- Deck hinge is fully supported across the entire width of the deck, which spreads the load across the width of the deck instead of concentrating the load on just a few hinge points
- Durable textured powder coat provides an extremely durable finish, better corrosion protection and adhesion compared to wet paint
- Complies with ANSI MH30.1-2022 that includes rigorous load testing requirements
- Deck Thickness ¼ inch
- Lip Thickness 5/8 inch 30/35K, ¾ inch 40/45K
Environmentally Friendly
- Our powder coat process has fewer Volatile Organic Compounds (VOCs) and solvents compared to paint
- Overspray is recycled which reduces waste disposal issues compared to a traditional paint process
The US Environmental Protection Agency (EPA) recommends powder coatings as a sustainable coating option
Installation and Serviceability
- Open base frame creates generous space for service along the full length of the leveler, including the rear which is the most difficult area to reach for cleaning and a common collection point for debris
- Leveler main springs are tightened/loosened with one adjustment point conveniently located on lift arm
- Field serviceable with easy to reach adjuster for main spring
- Serviceable lip and hinge pin can be removed without breaking welds
- Maintenance brace is easy to reach under the leveler and is tethered so it never gets lost. Brace holds leveler up by the deck to allow lip maintenance
- Leveler ships with four forklift lifting loops bolted to deck, allowing leveler to be lifted from the front or rear for easy transport and placement in the pit
MODEL M68R
| WEIGHT CAPACITY | DIMENSION (NOMINAL) | |
|---|---|---|
| 30,000, 35,000, 40,000, and 45,000 lbs. | Model M68R: 6' W x 8' L Model M78R: 7' W x 8' L |
|
| BUMPERS | STANDARD | OPTIONAL |
| Laminated Bumpers 410-14 W1 |
✓ | |
| Laminated Upgraded Bumpers 410-14 W2, 412-14 W1/W2, 610-14 W1/W2, V420-11 W1/W2, V620-11 W1/W2, V624-11 W1/W2 |
✓ | |
| Steel Face Bumpers 410-14 SF W1/W2, 610-14 SF W1/W2 |
✓ | |
| CONTROL | ||
| Hold Down A/R | ✓ | |
| Working Range 12" Above/Below Dock | ✓ | |
| FINISH | ||
| Gray Powder Coat | ✓ | |
| LIP | ||
| 16" Lip | ✓ | |
| 18" & 20" Lip | ✓ | |
| Lip Keepers | ✓ | |
| Lip Bevel | ✓ | |
| Lip Taper (Model M78R only) | ✓ | |
| SAFETY | ||
| Safety Legs | ✓ | |
| Maintenance Brace | ✓ | |
| Safety Tread on Deck and Lip | ✓ | |
| Toe Guards: Working Range | ✓ | |
| Toe Guards: Full Operating Range | ✓ | |
| TRANSPORT | ||
| Reinforced Lifting Bolt Holes in Deck (4) | ✓ | |
| Steel Lifting Loops (Bolt to Deck) (4) | ✓ | |
| WEATHER SEALS | ||
| Weather Seal: Brush | ✓ | |
| Weather Seal: Neoprene | ✓ | |
| Chain Hole Seal | ✓ | |
1-Year Limited Warranty; 2-Year Limited Warranty when Overhead Door™ brand door and Mechanical Pit Leveler purchased together.
Documents
Related products
Aluminum Dock Board
Aluminum Dock Board
The Aluminum Dock Board is designed for secure and efficient loading operations. It features a durable aluminum diamond pattern plate reinforced with full-length structural steel bolt-on curbs. This combination enhances strength and prevents runoff, ensuring safety and reliability in dock loading applications.
Edge of Dock Leveler – Mounting Options
The Edge of Dock Leveler offers seamless functionality, engineered to optimize your dock’s performance. Paired with the right mounting option, it ensures smooth transitions, reinforced stability, and long-term reliability—no matter the working environment. From reducing downtime to improving safety, our mounting solutions elevate your operation’s efficiency.
Whether you need smooth building-to-truck transitions, stable vertical mounting, or easy concrete integration, we have a solution for you.
RRH SERIES RAIL RAMP HYDRAULIC LEVELER
RRH Series Rail Ramp Hydraulic Leveler
Heavy-Duty Hydraulic Dock Solution for Rail Applications
The RRH Series Rail Ramp Hydraulic Leveler is engineered for high-demand rail dock operations, delivering effortless push-button activation with superior toughness and reliability. It is designed for seamless integration and can be mounted on the dock wall or recessed in a short pit, offering operational flexibility and low ownership costs.
Steel Dock Board (TFL)
Steel Dock Board (TFL)
Reliable Strength with Locking Leg Stability
The Steel Dock Board (TFL) features the same heavy-duty design as the “T” dock board but utilizes locking legs instead of steel pins for secure positioning. This design ensures stability and ease of use, making it an excellent choice for standard dock loading operations.
Not recommended for below-dock loading.
VSH SERIES VERTICAL STORING HYDRAULIC LEVELER
VSH Series Vertical Storing Hydraulic Leveler
Optimized for High-Security and Temperature-Controlled Dock Operations
The VSH Series Vertical Storing Hydraulic Leveler is engineered for demanding dock environments, providing push-button operation, exceptional durability, and low maintenance costs. Its vertical storing design enhances climate control, security, and facility cleanliness, making it ideal for temperature-sensitive and high-security applications.
