Rolling Steel Service Door – 625S
Model 625S
EverServe® Model 625S
This heavy duty Stormtite™ insulated springless service door delivers security, reliability and ease of serviceability and is best suited for applications that require protection against weather extremes. The insulated slats provide climate control as well as sound reduction, while perimeter seals provide additional protection from weather.
Overview
Construction
| Product Specifications | |
|---|---|
| Standard Max Width | up to 30' (9246 mm) depending on gauge and slat type |
| Standard Max Height | up to 20' (6096 mm) depending on gauge and slat type |
| Mounting | Interior or exterior face of wall |
| Control panel | Electronic controller with microprocessor self-diagnostics. Digital readout indicates door action, alarm conditions, and fault conditions. Time delay self-close timer and non-resettable cycle counter is included. One open/close/stop push button station integrated in control panel. Enclosure is IP54 rated (NEMA 3 equivalent). |
| Curtain | Galvanized steel interlocking roll-formed slats, end locks attached to prevent lateral movement; Insulated flat profile (F-265i) for doors up to 30' wide - front and back slats 24 gauge. Slat cavity shall be filled with CFC-free, foamed in-place, polyurethane insulation |
| Curtain finish | Gray, Tan, White or Brown polyester top coat |
| Bottom bar | Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with weatherstrip |
| Hood | 24-gauge galvanized steel primed; motor and end cover provided |
| Brackets | Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel |
| Insulation | R-value* of 7.71 for energy-efficiency. U-value of .13 and STC rating of 21 |
| Guides | Bottom, exterior curtain-side guide, interior hood baffle |
| Guides | Three structural steel angles PowderGuard® Premium powder coated black; With high cycle UHMW wear strip |
| Door roll | Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device |
| Stormtite™ perimeter seal system | Exterior guide seal, interior hood baffle, bottom astragal |
| Safety devices | Built-in braking mechanism provides additional peace-of-mind against uncontrolled curtain travel. Photoelectric safety sensors with guards - provide obstruction monitoring during door operation to help prevent injury and damage |
| Operation | Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled; Manual hand chain for power outage. Horsepower appropriate to door size/weight; 230V AC 3-phase motor |
| Actuator | Single open/close/stop push button station incorporated into control panel |
| Wind load | 20 psf |
Warranty
- 36 month limited warranty coverage on door system
Options
Standard Exterior Color
White
Gray
Tan
Brown
Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door™ Distributor.
Powder Coat Color Options
PowderGuard® Premium powder coat options are available in approximately 200 colors as well as custom matching to specification.
Door Options
- Motor options: 208V AC 1PH†, 220V AC 1PH, 208V AC 3PH†, 230V AC 3PH, 460V AC 3PH†, 575V AC 3PH†
(†requires stand-alone mounted transformer) - Flat profile type F-265i for doors up to 30' wide. Available in: [Front Slat] 22, 20, 18 gauge galvanized steel; 22, 20 gauge stainless steel; 18 gauge (.040") aluminum [Back Slat] 22 gauge steel; 24 gauge stainless steel; 22 gauge (.024") aluminum*
- Bottom bar also available in galvanized steel, stainless steel and aluminum
- Guide options include galvanized steel, power-coated steel
- Hood available in powder coat, stainless steel and aluminum; sloped hood also available
- Brackets also available in powder coat, galvanized steel
- IP65 (NEMA 4/4X equivalent) control panel
- Sensing edge for improved safety
- Additional set of photoelectric sensors
- Optional push buttons, loop detectors, radio control, motion detectors or any combination thereof available for door operation/control
- PowderGuard® Premium powder coat and PowderGuard® Max hardened powder coat available in approximately 200 colors as well as color-matching to specification
- PowderGuard® Textured Finish: Industrial textured powder coat provides a thicker, more scratch resistant coat for added product protection on guides, bottom bar and head plate
- Uniformly spaced glazed acrylic vision lites available in 10” x 1”
- High wind load options available
*Consult factory for specific slat profile and gauge width limits.
Brochures
Documents
Springless Rolling Service Door EverServe®
Related products
EverGuard™ Tornado Resistant Shelter Door – 610F
Model 610F
Designed to provide dependable protection from high wind and wind-borne debris during tornadoes and hurricanes. Built, tested, and certified to meet the stringent requirements of the ICC-500 building code as well as the FEMA 361 guideline.
The Model 610F is structural wind load design pressure tested to +/- 300 psf and is impact rated for up to 100 mph. Rolling Steel Storm Shelter Door Model 610F is built to meet your most demanding and rigorous applications.
Applications include schools, storm shelters, safe room, emergency operations centers, 911 call stations, fire, rescue, and ambulance stations, police stations.
Fire-Rated Rolling Service Door – 634
Model 634
FireKing® Model 634
Fire-rated service door model 634 is a large fire door with UL, ULC and FM ratings for 1-1/2 hr, 3hr labels. Additional 4 hr UL and oversized labels available. Doors over 18 feet high must be certified by FM. The FireKing® Model 634 rolling fire-rated service door offers superior protection wherever a listed fire door is required. Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, FireLite® vision lites, smoke detectors, horns and strobes.
Rolling Sheet Door – 770SS
Model 770SS
ProStar™ Model 770SS
The Model 770SS rolling sheet door is a great option for facilities that require a quality door that installs quickly, operates dependably, and requires minimal maintenance. Like the other doors of our rolling sheet door line, this 26-gauge door features quick-connect components that simplify and speed installation while ensuring door sturdiness. Stepped counterbalance rings and a unique curtain profile ensure a tight curtain wrap resulting in a smooth operating door and minimal nesting. A host of other standard features from standard roller bearings and dual rub strips on both guide edges and both front edges of the curtain further promote smooth operation and longer life. Available in 12 standard colors, the Model 770SS represents a good choice and a good value.
Rolling Sheet Door – 790CW
Model 790CW
ProStar™ Model 790CW
When your project requires a door that can handle high wind load conditions, yet is attractive, versatile and economical, the Model 790CW rolling sheet door fits the job. This rolling sheet door is rated for a design pressure from 22/-22psf (for a 20’0” wide door) to 41/-41psf (for a 10’0” wide opening), and can be built up to 16’0” tall. This rolling sheet door is available in 12 standard colors. Fabricated of high strength, 26-gauge galvanized steel curtain sections, 14-gauge universal guides, and steel bottom bar angle, the 790CW rolling sheet door is a strong and durable door. With quick-connect components, universal through-hole guide design, and unique curtain profile and stepped counterbalance rings that minimize nesting, this door is designed for fast installation, smooth operation and low maintenance, too.
Rolling Steel Service Door Stormtite™
Model 620
Stormtite™ 620
These rolling steel doors are an ideal choice for keeping climate-controlled air in and the elements out. Like the Model 610, the Stormtite™ 620 offers the option of a steel, stainless steel or aluminum curtain in an array of finishes and colors. For enhanced thermal efficiency, the 620 is furnished with flat slat profiles only, as well as weatherstripping on the exterior side of the guides, on the bottom bar and a hood baffle. Additional weatherseals are available as options on the interior side of the guides and hood lintel.
Rolling Steel Service Doors 625
Model 625
Stormtite™ Insulated Heavy-Duty Rolling Doors
The Model 625 rolling steel doors are an insulated, heavy-duty rolling service door that is an ideal choice for applications requiring a moderate level of thermal protection. Designed in sizes up to 30'4" wide and 28'4" high (9246 mm and 8636 mm), these doors are constructed with a CFC-free, foamed-in-place polyurethane insulation. Vinyl weatherstripping on the bottom bar, exterior curtain-side guide and hood baffle provides additional protection against air infiltration.
Upward Coiling Security Grilles – 670
Model 670
When your project calls for an upward coiling grille that is as versatile and attractive as it is rugged and secure, look no further than Model 670. These grilles provide an attractive yet functional means to secure areas where public access must be restricted, without blocking air, light or sight. A wide range of options make these grilles an ideal choice for interior or exterior use in a variety of retail, industrial and commercial settings.
